SUPER PC Main Home
Multiple Monitor Displays: Setup Instructions PDF Print E-mail

         SUPER PC: Multi-Monitor Setup Instructions                  
       
        While computer is off, plug in the amount of monitors that you wish to use into
        the back of the computer. Then, turn on the computer. All of the monitors might
        not come on until you set them up in the display settings in your Control Panel.

          Start Menu  >  Control Panel  >  Display  >  Settings Tab

    1)  For Windows XP - Right Click on your Desktop and select Properties from menu.
          Windows Vista - Right Click on your Desktop and select Personalize from menu.
          (Or you can Choose Display Settings from the Control Panel)

    2)  A small window will pop up. Choose the tab that says Settings at the top
          right of the window. Then you should see the following dialogue window.

           
   
    3)  Seperately click on each numbered blue box, to highlight it, and then check
          the box that says Extend my Windows desktop onto this monitor.
          After you enable all of the monitors, click the Apply button. All of the
          monitiors should come on, if they weren't already on. Make sure to
          set all monitors to 32-Bits. We recommend using the resolution
          of 1024 x 768, or greater for the best video performance!
   
    4)  Next, click the Identify button. You will see a number on each screen.
          Use this to guide you, to drag and arrange the Blue Numbered Boxes, into
          the configuration that you would like. Then click Apply again.
         That should do the trick! You won't have to set this up again, unless you want to
         change your monitor arrangement. It will automatically remember your settings,
         everytime you restart your computer. Now, it's time to have some amazing fun!